Ta Additional Thermostat Optional - Dal Zotto INSERTO 850 ELITE Manuel Utilisateur

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

WITH PROBE NTC 10K
Remove the jumper on 1 and connect the NTC probe in the room that needs to be temperature-controlled through air ducting 1.
2 control modes:
OPERATION IN AIR DUCTING WITH NTC PROBE 10K
SET con gured to AUTO
Set the desired temperature ( from 7 to 37 °C)
SET con gured to COMFORT
Set the desired temperature ( from 7 to 37 °C)

TA ADDITIONAL THERMOSTAT OPTIONAL

The appliance is able to control the room temperature through an additional thermostat (optional).
After ignition (by pressing key 1 or in chrono mode), the stove will work to reach the set value on the thermostat, displaying WORK (closed
contact) on the screen. The room sensor incorporated into the handheld device is automatically ignored.
TO INSTALL AND ACTIVATE:
Š A mechanical or digital thermostat is required.
Š Remove the plug from the socket.
Š Using the image to the side as a guide, connect the two thermostat wires (clean contact - no 230 V!) to
the respective terminals at the back of the machine, one red and the other black.
Š Connect the power to the stove again.
Š Press the key (
), until the set temperature is set to LOW-TA.
The stove is now correctly con gured.
OK
It will work by checking the external additional thermostat based on the TA function.
INSTALLATION MUST BE PERFORMED BY QUALIFIED STAFF AND/OR THE MANUFACTURER'S SERVICE TECHNICIANS
58
Once the speci c activation threshold has been reached and exceeded, at temperature
to be satis ed the air ducting motor will follow the stove settings.
When the temperature set on the set TEMPERATURE is reached, the air ducting motor
will switch to minimum and then follow the stove settings again when there is a new
request.
Once the speci c activation threshold has been reached and exceeded, at temperature
to be satis ed the air ducting motor will follow the stove settings but at a lower speed
than in SET AUTO for increased acoustic/ambient comfort.
When the temperature set on the set TEMPERATURE is reached, the air ducting motor
will switch to minimum and then follow the stove settings again, but at a lower speed
when there is a new request.
SAME OPERATING SETTINGS FOR AIR DUCTING 2 MOTOR
ENGLISH
OPTIONAL
TA

Publicité

Table des Matières
loading

Table des Matières