First Time Use; Setting The Clock; Timer Function - Danby Designer DMW799W Manuel Du Propriétaire

OPERATING INSTRUCTIONS

FIRST TIME USE

When the appliance is plugged in for the fi rst time, the display
will show "ENTER CLOCK TIME". Use the number pad to enter the
current time and then press the clock button to confi rm
When setting the cook timer, the appliance will return to standby
mode if there is no input within 25 seconds.
During operation:
• Press the Start/Stop button to pause the functioning.
• Press the Start/Stop button again to resume functioning.
• Press the Reset button to cancel the cooking program.
The appliance will beep four times at the end of a cooking program
and "END" will show on the display. The appliance will continue to
beep every 2 minutes until a button is pressed or the door is opened.

SETTING THE CLOCK

The clock can be only be set as a 12 hour clock.
To set the current time:
1. Press the Clock button.
2. Use the number pad to enter the current time.
3. Press the Clock button to confi rm.
During operation, press the Clock button to see the current time.

TIMER FUNCTION

To set the timer function:
1. Press the Timer button.
2. Use the number pad to enter the desired time to run the
microwave.
3. Press the Start/Stop button to begin operation.
7