Front Panel - Ramiaudio PJO700 Manuel Utilisateur

FRONT PANEL

2
3
4
5
6
7
1 - A microphone input sensitivity ranges from -60 dBu to -34 dBu.
2 - Key with light indicator, sends A microphone to the embedded USB sound card.
3 - A microphone peak indicator (use 1 to adjust just before light on).
4 - A microphone treble setting pot.
5 - A microphone bass setting pot.
6 - A microphone linear 60 mm fader. Setting uses a VCA.
7 - A microphone low cut filter insertion
8 - B microphone or A line selection for this channel.
- B microphone input on connector L
- A line input on connector G
9 - Illuminated switch to send B microphone / A line to USB embedded sound card.
10 - Microphone peak indicator (adjust using M just before light on).
11 - B microphone / A line linear 60mm fader. Setting uses a VCA.
12- Led indicator of line B or C microphone selection. Selection uses J.
13- USB line B or microphone C return selection for this channel. Return is the USB sound card output.
Selection is made using J.
14- Illuminated key sends USB input/ Line B/ microphone C to the embedded USB sound card.
15- C microphone input peak indicator (adjust peak level using K just before light on).
16- USB input / line B / microphone C linear fader (uses VCA).
Rami
1 8
Mic B Line A
Mic A
Sens
REC REC
Peak
0
+6 +6
+3 +3
-12 +12
TREBLE
0dB 0dB
0
-5 -5
-10 -10
-15 -15
-12 +12
-20 -20
BASS
-30 -30
-40 -40
-50 -50
-60 -60
- -
Off Off On
LOW CUT LOW CUT
MIC B/LINE A
MIC A
10 15
9 12 13 14 17
Line B
USB
Mic C
REC REC
Peak Peak
+6 +6
+3 +3
0dB 0dB
-5 -5
-10 -10
-15 -15
-20 -20
-30 -30
-40 -40
-50 -50
-60 -60
- -
USB/LINE B/MIC C HYBRID RETURN
11 16
18
18 20
PJO 700
Adjust
HYBRID
ON
PEAK
METER
L R
+6
Mono Stereo
+3
0dB
- 3
0 10
MONITOR
- 6
- 9
- 12
0 10
- 18
PHONES B
- 24
- 35
Out Monitor
0 10
PHONES A
TALK TALK
REC
TO A TO B
19 28
21
22
23
24
25
26
27
29
PJO700