Panasonic NE-2146-2 Mode D'emploi page 5

Outline Diagram and Operation
(1)
(2)
(7)
(6)
Example: To cook food at MEDIUM power for 4 minutes
PAD
1
Open the door and put the food in the oven.
The oven lamp will turn on. "0" and Power Level Indicator
appear.
Note: While "0" appears, operation is available. One minute after the door
2
Press the desired Power Level Selector Button, if other than
(HIGH).
3
Set heating time.
Please check the heating time will appear.
Note: up to 25 min. on
4
Press Start Button.
The oven lamp will turn on and heating will start. Power Level Indicator
will start to blink, and heating time will count down.
• When all time expires, beep tone will sound and heating will stop. The oven lamp will
turn off. "0" will blink until the door is opened. One minute later, cooling fan will stop.
• Open the door and take the food out. The oven lamp will turn on. Digital Display Window
will show "0" and Power Level Indicator
• Close the door. The oven lamp will turn off. One minute later, Digital Display Window will
go blank.
• When you press the Start Button with door open, "0" will appear in the display in all
cases.
• Even after setting the heating time you can still change the power level.
• If you wish to change the heating time during heating, simply adjust the timer to desired
minutes and seconds.
(3)
(8)
INSTRUCTION
is closed, "0" will disappear.
, 30 min. on
of NE-2146-2/NE-1846/NE-1646
(1) Digital Display Window (see below)
(4) (5)
(2) Power Level Indicator Display
(3) Power Level Selector Buttons
(4) Timer Dial
(5) Start Button
(6) Door Handle
(7) Oven Lamp Cover
(8) Air Filter
(9)
(9) Splatter Shield (top of inner cavity)
(10) Middle Shelf (NE-2146-2 only)
(10)
A –– Heating Time Display (min. sec.)
B –– Power Level Indicator
or
- 3 -
A
:
HIGH
: MEDIUM
: DEFROST
DIGITAL DISPLAY WINDOW
will
B