Wiring Connection - Kenwood KDC-X597 Mode D'emploi

Wiring connection

KDC - BT355U
R L
Front output
MIC (Microphone input
Rear/subwoofer output
terminal) (➜ 10)
Antenna terminal
To front speaker (left)
White/Black
To front speaker (right)
To rear speaker (left)
Green/Black
To rear speaker (right)
Purple/Black
Ignition switch
Car fuse box
Red
(Ignition wire)
Yellow
Car fuse box
(Battery wire)
Black (Ground wire)
To the metallic body or
chassis of the car
Battery
KDC - X597
KDC - BT555U
Fuse (10 A)
KDC - X597
To the optional SiriusXM Connect Vehicle Tuner (commercially available) (➜ 8)
If no connections are made, do not let the wire come out from the tab.
White
Light blue/yellow
(Steering remote control
wire)
Gray
Gray/Black
Green
Blue/White
(Power control wire)
Purple
Brown
(Mute control wire)
Blue
Subwoofer output
Front output
R L
Rear output
KDC - BT555U
/ :
STEERING WHEEL
REMOTE INPUT
To the steering wheel remote control adapter
REMOTE CONT
To the power control terminal when using the
optional power amplifier, or to the antenna control
P. CONT
terminal in the vehicle.
To the terminal that is grounded when either
the telephone rings or during conversation. (To
connect the Kenwood navigation system, refer your
MUTE
navigation manual.)
(Not used)
ANT CONT
Part list for installation
A Faceplate
( ×1 )
B Mounting sleeve
( ×1 )
C Trim plate
( ×1 )
D Wiring harness
( ×1 )
E Extraction key
( ×2 )
F Flat head screw
( ×4 )
G Round head screw
( ×4 )
ENGLISH | 21