Kenwood KDC-X597 Mode D'emploi page 11

Bluetooth mobile phone
To Do this
Receive a call
Press
buttons (1 to 6) (or
• The
(for
(for
During a call, the button illuminates in red.
• When [AUTO ANSWER] is set to the selected time, the
unit answers incoming call automatically. (➜ 12)
Reject an incoming
Press L SRC (or
call
End a call
Press
Press 6 38 during a call.
Switch between
hands-free and
• Operations may vary according to the connected
private talk modes
Bluetooth device.
Adjust the phone
Turn the volume knob during a call.
volume
Phone volume: [00] to [35] (Default: [15])
• This adjustment will not affect the volume of the
other sources.
Switch between two
1
Press
connected phones
2
Press and hold
connected phones ( [MAIN]/ [SUB] ).
Text message notification
When the phone receives a text message, the unit rings and "SMS RECEIVED" or
"NEW SMS" appears.
• You cannot read, edit, or send a message through the unit.
• To clear the message, press any button.
or the volume knob or one of the number
on RC-406).
button illuminates and flashes in green
KDC - X597 KDC - BT555U
/ ) or flashes in red
KDC - BT355U
) when there is an incoming call.
on RC-406).
or L SRC (or
on RC-406).
to enter Bluetooth mode.
to switch between the two
Bluetooth mode operations
1
Press to enter Bluetooth mode.
2
Turn the volume knob to make a selection (see the following table), then
press the knob.
Repeat step 2 until the desired item is selected.
• To return to the previous hierarchy, press
• To cancel, press .
1 Turn the volume knob to select a name, then press the knob.
PHONE BOOK
2 Turn the volume knob to select a phone number, then press the knob to call.
• To return to the previous hierarchy, press
• If the phone supports PBAP, the phonebook of the connected phone is
automatically transferred to the unit when pairing. If the phone does not
support PBAP, "NO DATA" appears. Transfer the phonebook manually.
(➜ 12, TRANSFER PB)
• Contacts are categorized as: GE (general), HM (home), OF (office), MO (mobile),
OT (others).
• This unit can display only non-accent letters. (Accent letters such as "Ú" is
showns as "U".)
• If the phonebook contains many contacts, use Alphabet Search. (➜ 12)
CALL HISTORY/ 1 Turn the volume knob to select a name or a phone number.
HISTORY
• "I" indicates call received, "O" indicates call made, "M" indicates call missed.
• Press SCRL DISP to change the display information (name or phone
number).
• "NO DATA" appears if there is no recorded call history.
2 Press the volume knob to call.
NUMBER DIAL 1 Turn the volume knob to select a number (0 to 9) or character ( , #, +).
2 Press 4 / ¢ to move the entry position.
Repeat steps 1 and 2 until you finish entering the phone number.
3 Press the volume knob to call.
(or using RC-406)
1 Press the number buttons (0 to 9) to enter the phone number.
2 Press
to call.
DVC PRIORITY/ MAIN-XXX/ SUB-XXX: To view which device is connected as MAIN and which is
DVC PRI connected as SUB.
BLUETOOTH®
.
.
ENGLISH | 11