Intended Use; Connecting And Operation - Goobay 58965 Mode D'emploi

User manual
Voltage
Length
Weight
Tab. 2: Specifications
3

Intended Use

accidents, injuries, and damages to persons and property.
4

Connecting and Operation

13
We do not permit using the device in other ways like described
in chapter "Description and Function" and „Safety Instructions".
Use the product only in dry interior rooms. Not attending to
these regulations and safety instructions might cause fatal
Risk of injury by stumbling and falling
• Mind placing cables in a way, nobody will be
disabled and the cable not be damaged.
• Install the system and devices attached to it in a way that
persons cannot be injured, or objects not be damaged for
example by dropping or stumbling.
Material damage due to wrong placement and
wrong voltage supply
• Only place on non-slipping surface.
• Use only the supplied power supply.
1. Check the scope of delivery for completeness and integrity.
2. Compare the specifications of all equipment to be used and
ensure compatibility
3. First connect your source device to the converter (INPUT).
4. Connect the cable of your output device to the converter
(OUTPUT).
5. Connect the original power supply unit to the DC socket of
the product and then the mains plug to a mains socket.
6. Disconnect the product from the mains when not in use.
The product operates automatically when connected to mains.
During operation, no operating elements are to be operated.
5 V
0.6 m
31.5 g