Pnp Receiver Selection And Installation - Horizon Hobby Force RC F-18 Blue Angel Manuel D'utilisation

EN
Model Assembly
(Continued)
Missile Installation
1. Use CA to attach the missiles to the aircraft. Refer to the illustration for the
correct location for each item.
Nose Cone Installation
1. Apply CA to the fuselage where the nose cone fi ts. Ensure the nose cone is
oriented correctly.

PNP Receiver Selection and Installation

The Spektrum AR636A receiver is recommended for ths airplane. If you choose to install
another receiver, ensure that it is at least a 4-channel full range (sport) receiver. Refer to
your receiver manual for correct installation and operation instructions.
Installation (AR636A shown)
1. Remove the canopy from the fuselage.
2. Mount the receiver parallel to the length of the fuselage as shown.
Use double-sided servo tape.
CAUTION: Incorrect installation of the receiver could cause a crash.
3. Attach the appropriate control surfaces to the their respective ports on the
receiver using the chart in the illustration.
6
1 = Throttle
2 = Aileron
3 = Elevator
4 = Nose Wheel
F-18 Blue Angel