Chain Lubrication - britech BT 36 Mode D'emploi

PETROL CHAIN SAW FOR TREE SERVICE USER MANUAL
3) Prepare the fuel mix and pour the fuel only in
an outdoor location (fig.28).
4) Store the fuel in a suitable container and with
the cap tightly closed.
During each refuelling operation, also top
up the chain oil tank.

6. CHAIN LUBRICATION

1) WARNING! Only use oil specifically designed
for chain saw lubrication (see fig.29).
2) DO NOT use old oil.
3) Using a non recommended oil can damage
the guide bar, the chain and the lubrication sys-
tem.
Fig.29
Fig.28
7. STARTING AND STOPPING OP-
ERATION
WARNING! Strictly follow the safety
rules specified in the previous
chapter 2 MAIN SAFETY PRECAUTIONS.
DANGER! Start the chain saw only
when all its parts are in place, in-
cluding the guide bar and chain.
STARTING THE CHAIN SAW
STARTING A COLD ENGINE
Before starting the engine, apply the chain
brake by pushing the chain safety lever all
the way forward (fig.30)
Fig. 30
STOP
33