Use; Daily Switch-On; Cup-Warmer (Where Is Present); Heating Phase - La Cimbali M29 Start Utilisation Et Installation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34
"Before using the machine make sure that:
the main electricity supply ON/OFF switch
is ON;
the water supply and water softener taps
are open."
Turn the main switch (1) to position 1.
If the water level in the boiler is below the minimum level,
the automatic level indicator light (9) lights up, and the
boiler is filled up to the optimal level (indicator light 9 OFF).
Turn the main ON/OFF switch (1) to position 2.
"Heating" now begins.
At the end of the day, turn the machine OFF by turning the
main ON/OFF switch (1) to position 0.
CAUTION: do not put any cloth on the cup-
warmer.
During heating, if one of the coffee dispensing switches
(2) is pressed, the machine dispenses a coffee at the
temperature reached at the time.
Heating is completed when the boiler gauge indicator (10)
remains stable in the green area.
Remove the filter holder (8), empty out any coffee grouts
and fill it up with 1 or 2 servings of ground coffee, depending
on the filter holder used.
Press the ground coffee in filter down uniformly, using the
grinder/doser presser.
Remove any residues of ground coffee from the filter rim.
Fit and tighten the filter holder (8) on the coffee dispenser
unit, positioning the cup (or cups) under the nozzle (or
nozzles) of the filter holder (8).
Turn the coffee dispensing switch (2) to position "1" for
dispensing.
When the required serving is complete, stop dispensing
by rotating the knob (2) to position "0".
Do not remove the coffee filter before the
coffee dispensing has completed.

USE

10. Daily Switch-On

11. Cup-Warmer (where is present)

12. Heating phase

13. Delivery of the coffee

9 EN
1
Place only coffee cups, cups and glasses to be used in
conjunction with the coffee machine on the cup-warming
plate.
Ensure that the coffee cups are completely drained before
placing them on the cup-warming plate.
No other objects shall be placed on the cup-warming plate.
Press the button (13) and check to see that the light turns on.
The machine is now ready to dispense coffee, steam and
hot water.
To make sure that the dispenser unit and the filter holder
(8) are at similar temperatures, turn the coffee dispensing
switches (2) and let the machine dispense coffee for a
few seconds. Then turn the knobs (2) counter-clockwise
to stop dispensing.
2
9
13
8
2
8

Hide quick links:

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

M29 select-start

Table des Matières