Cisco Systems Linksys BEFVP41 Guide D'installation Rapide page 7

5 PPTP
PPTP is a service used in Europe and
Israel only. If you are using a PPTP
connection, check with your ISP for
the necessary setup information.
a
Enter the IP Address, Subnet
Mask and Gateway Address
provided by your ISP .
b
Enter the User Name and Pass-
word provided by your ISP . (Also
enter the Host Name and
Domain, if required.)
c
Click the Save Settings button,
and go to Step E.
6 Heart Beat Signal
Heart Beat Signal is a service used in
Australia only. If you are using a Heart
Beat Signal connection, check with
your ISP for the necessary setup infor-
mation. When you are finished, go to
Step E.
E
Depending on the setup infor-
mation from your ISP , you may
need to provide a host name
and domain name for the
Router. The Host Name and
Domain Name fields are usu-
ally left blank. If requested by
your ISP (usually cable ISPs),
complete these two fields.
D
5
D
6
7