Cisco Systems Linksys BEFVP41 Guide D'installation Rapide page 6

c
In the Primary and Secondary
DNS fields, enter the DNS
address(es) provided by your
ISP . You need to enter at least
one DNS address.
d
Click the Save Settings button,
and go to Step E.
3 PPPoE
a
If your ISP says that you are
connecting through PPPoE or if
you normally enter a user
name and password to access
the Internet, then select PPPoE
as the Internet Connection
Type.
b
Enter the User Name and Pass-
word provided by your ISP . (Also
enter the Service Name, if
required.)
c
Click the Save Settings button.
d
Click the Status tab, and then
click the Connect button to
start the connection.
e
Go to Step E.
4 RAS
RAS is a service used in Singapore
only. If you are using a RAS connec-
tion, check with your ISP for the nec-
essary setup information. When you
are finished, go to Step E.
6
D
3
D
4