Kenwood KS-1300HT Mode D'emploi page 4

Connection
The speaker wires and labels of speakers' back panel are color-coded to facilitate connection. Connect each wire to the matching-
colored terminal, as shown in the figure.
Be sure to turn off your amplifier before connecting or disconnecting speakers.
Subwoofer (option)
Front right
speaker
(–) (+)
Red
1. Twist wire's conductor
Notes:
• The speaker system's peak input power is indicated in the specifications. To avoid speaker damage, never run the speakers at power levels
exceeding this limit.
• This speaker system has a nominal impedance of 8 ohms. To ensure safe and reliable operation, be sure that your amplifier or receiver is able
to work with 8-ohm speakers.
• Never short the (+) and (–) speaker wires together.
• Do not reverse L and R or (+) and (–) connections. Reversal of sides or polarities may result in unnatural, incorrectly positioned sound.
4
English
Speaker terminals
(Amplifi er or receiver)
2. Push
(–)
(+)
Green
(–)
Center speaker
3. Insert the conductor
Right Left
Surround
speakers
(+)
Gray
(–)
(+)
Blue
Front left
speaker
(+)
(–)
White
4. Release