Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Section
XM tuner
11
Introduction of advanced
XM tuner operation
1 Function display
Shows the function status.
1
Press MULTI-CONTROL to display the
main menu.
FUNCTION, AUDIO and ENTERTAINMENT
appear on the display.
2
Use MULTI-CONTROL to select
FUNCTION.
Channel mode appears on the display.
# To return to the channel display, press BAND.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the channel display.
Switching the XM display
% Press DISPLAY to switch the XM display.
Each press of DISPLAY changes the XM dis-
play in the following order:
Text information (channel name)—Artist name
and text information—Song title and text infor-
mation—Category name and text information
—Simple display
68
En
1 1 1
Storing and recalling
broadcast stations
You can easily store up to six broadcast sta-
tions for later recall.
1
When you find a station that you want
to store in memory press LIST to switch to
the preset channel list mode.
2
Use MULTI-CONTROL to store the se-
lected station in memory.
Turn to change the preset number; press and
hold to store.
The XM preset number you have selected will
flash and then remain lit. The selected station
has been stored in memory.
# If you do not operate the list within about 30
seconds, the preset channel list mode is can-
celed automatically.
Notes
! Up to 18 stations, six for each of three XM
bands can be stored in memory.
! You can also store stations assigned to preset
tuning numbers by pressing and holding one
of the preset tuning buttons 1–6 on the re-
mote control.
Switching the XM channel
select mode
You have two methods for selecting a channel:
by number and by categoy.
When selecting by number, channels in any
category can be selected. Select by category
to narrow your search down to only channels
in a particular category.
1
Use MULTI-CONTROL to select
FUNCTION.
Channel mode appears on the display.
Publicité
Chapitres
Table des Matières
