Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Reversing the door

If reversing the door with the unit in normal position, then it is recommended to be two people.
Else the unit can be placed on its back on the floor. If this method is used the unit must be
placed in normal upright position at least two hours before connecting to power.
Left door hinge is optional. (See p.18)
1. Disconnect the power supply
Loosen the two screws in the top panel.
Pull out carefully the top panel.
2. Unscrew the two screws in the lower panel.
3. Remove the cover by using suitable tool
and a hammer
9
GB

Publicité

Table des Matières
loading

Table des Matières