Receive Mode; Radio - Kenwood KDC-X720 Mode D'emploi

HD Radio™ tuner
(for
TUNER SETTING
IF BAND AUTO: Increases the tuner selectivity to reduce interference noises from
adjacent FM stations. (Stereo effect may be lost.) ; WIDE: Subjects to
interference noises from adjacent FM stations, but sound quality will not
be degraded and the stereo effect will remain.
AUTO MEMORY YES: Automatically starts memorizing 6 stations with good reception. ;
NO: Cancels.
• Selectable only if [NORMAL] is selected for [PRESET TYPE]. ( 5)

RECEIVE MODE

Sets the receive mode of the HD Radio receiver.
AUTO: Automatically tunes to analog broadcast when there is no digital
broadcast. ; DIGITAL: Tunes in to digital broadcast only. ; ANALOG: Tunes
in to analog broadcast only.
CLOCK
TIME SYNC ON: Synchronizes the unit's time to the Radio Broadcast Data System
station time. ; OFF: Cancels.
8
ENGLISH
/ )
Default: XX

RADIO

(for
Search for a station
1 Press repeatedly to select RADIO.
2 Press repeatedly (or press
control) to select FM1/FM2/FM3/AM.
Press S / T (or press S /
3
search for a station.
• To change the searching method for S / T: Press
repeatedly.
AUTO1 : Automatically search for a station.
AUTO2 : Search for a preset station.
MANUAL : Manually search for a station.
• To store a station: Press and hold one of the number buttons (1 to 6).
• To select a stored station: Press one of the number buttons (1 to 6) (or
press one of the number buttons (1 to 6) on the remote control).
Direct Access Tuning
(using the remote control)
1
Press DIRECT to enter Direct Access Tuning.
2
Press the number buttons to enter a frequency.
3
Press to search for a station.
• To cancel, press or DIRECT.
• If no operation is done for 10 seconds after step
is automatically canceled.
/ / )
/ on the remote
on the remote control) to
2 , Direct Access Tuning