Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
17
DO NOT turn on the power until installation is complete!
Connect the Power Supply Cable to the rangehood.
Connect the Green (Green and Yellow) ground wire under the
Green grounding screw. Attach the White lead of the power supply
to the White lead of the rangehood with a twist-on type wire con-
nector.
Attach the Black lead of the power supply to the Black lead of the
rangehood with a twist-on type wire connector.
A. Home power supply cable
B. Black wires
C. UL listed wire connectors
D. White wires
E. Green (or bare) ground wire from home power supply connected to green ground screw
F. Range hood power supply cable
G. Green ground wire from Range hood power supply cable connected to green ground screw.
2
18
Slightly widen the
two sides of the
lower section and
hook them between
N2
A
the upper section
and the wall, making
sure that they are
properly housed.
Installation of wiring connection
A
B
C
D
N1
B
E
G
F
N
2x
25
Publicité
Table des Matières
