Broan-NuTone EPLEC1 Série Manuel D'installation, D'utilisation Et D'entretien page 18

7 ] For framed cabinet, secure the hood to the EZ1 brackets using a 10" screwdriver bit and
8 ] For frameless cabinet, secure the hood to the cabinet using a 10" screwdriver bit and 4 no. 8 x 5/8"
9 ] Attach power cable to the hood using the strain relief.
18
4 no. 8-18 x 1/2" metal screws with washers (screws and washers included in parts bag). Insert
2 screws and washers per side, in the slots (as shown in inset on illustration below).
round head wood screws (screws and washers included in parts bag). Insert 2 screws and
washers per side, in the slots (as shown in inset on illustration below).
M
ETAL
S
CREWS
FRAMED
CABINET
FRAMELESS
CABINET
W
OOD
S
CREWS