Publicité
Les langues disponibles
Les langues disponibles
GB
Installation in 190 x 190 x 80 mm glass bricks with ZG 16 accessoires
1. Preparatory work
•
Drill holes (5.5 diam.) in the tappet
away the rib of the grille at the point where the screw head
contact.
•
Pull off the protective foil over the adhesive strips
•
Pinch or break off the retainer springs
2. Installation
•
Insert the M 5 x 120 hexagonal screws
and
from the outside and screw on the nuts
•
In case of uneven glass bricks, the gaps can be filled in using the sealing
compound provided.
See instructions with fan for electrical connections final assembly,
cleaning and special notes.
of the outer grille
and
using side cutting pliers.
through the drillholes
.
and work
makes
.
Publicité
