Switching On/Off - Koba Vision ZoomCam Mode D'emploi

Negative – positive reading.
In this mode, the image is
converted into artificial
coulors for high contrast. By
pressing the coulor button
long you can set other
coulors.
Brightness. Increase or
decrease the brightness of
the image.
Background. To filter the
background or change the
thickness of the letters.
SWITCHING ON / OFF
In combination with a screen or monitor
Switching on with button 1. Most screens are switched on automatically by the ZoomCam. If this does not
happen, switch on the screen and choose the correct source (see screen manual).
The ZoomCam is turned off by pressing button 1 long.
In combination with a computer or tablet (streaming)
The ZoomCam is automatically switched on by the viewer.
The ZoomCam switches off by stopping the stream, by closing the application or by selecting another
camera. ZoomCam switches off with a delay of 30 seconds by default. During these 30 seconds, the image
is immediately available when the stream is started again.
KOBA Vision ZoomCam
Lighting. Adjusts the lighting.
Reading line. The image has
a horizontal line. You can
move the line up or down.
Overview. In this view, the
camera zooms to a small
magnification to provide
overview.
Mirroring. This view is only
available in distance mode. In
mirror mode you can point
the camera at yourself.
8