Power Supply - Koba Vision ZoomCam Mode D'emploi

CONNECTIONS
1. HDMI
The HDMI connection transfers the image from the
ZoomCam to a screen. This can be a television
screen as well as a monitor.
2. USB-C 3 port - POWER
This USB connection can provide additional power.
This USB connection is used if the other USB
connection does not provide sufficient power or to
connect an external battery or power supply.
3. USB-C 3 port - PC
The USB connection transfers the image to a
computer or tablet. The connection also provides
power to the device. This USB connection is the main
connection.

POWER SUPPLY

The ZoomCam operates on external power. Power will be supplied to the USB ports. Connect the USB cable or
USB power supply. The LED lights on the front an back inform details about the power source.
•
3x green: Enough power. ZoomCam is powered via USB-C or via 2 USB-A cables. The ZoomCam will
turn on without having trouble with power.
•
3x yellow: Not sure of sufficient power. ZoomCam is powered via a non USB-C supply. ZoomCam could
have a problem.
•
6x red: The ZoomCam can't turn on, because of too less power. Connect a second power source via
USB.
CONNECT THE ZOOMCAM TO A SCREEN
Connect the ZoomCam via HDMI. Power the device with the supplied USB-C adapter or by connecting the
ZoomCam to a USB port on the screen that provides sufficient power. Use:
•
HDMI cable to HDMI connection
•
USB-C power supply or USB-C - USB-A cable for connection to the screen → connect 1 of the 2 USB
connections
CONNECT THE ZOOMCAM TO A COMPUTER OR TABLET
KOBA Vision ZoomCam 5