LaCimbali M24 Select Utilisation Et Installation page 38

Dispensing with the Turbosteam selector (7a) (when
provided)
Machines equipped with the TURBOSTEAM (STOP
STEAM) dispensing system have the "stop steam dispensing
when set temperature is reached" function, and can rapidly
heat and froth milk.
Select the type of milk you desire:
- using the knob (7a), clockwise (frothed) or counter-
clockwise (hot).
When the set temperature is reached, steam dispensing
can be stopped:
- automatically;
- manually, turning the knob (7a) in in any direction.
Temperature setting
The temperature setting for the "Stop Steam" function is
user.
Nevertheless, the standard setting can be changed within
To make this change:
- switch off the machine;
- remove the cups-warmer;
- adjust the setting (R) on the Turbosteam card, keeping
in mind the corresponding number of notches and
temperature:
The indication of intermediate temperatures is approximate;
after each adjustment, please use a thermometer to
determine the actual set temperature.
The ideal setting for milk frothing is set in the factory.
adjustment valve (F):
- counterclockwise: more air > more frothy milk
- clockwise: less air > less frothy milk
Note: even slight turns of the valve (F) can make a
great difference in how the milk is frothed.
Correct alignment of the steam thermocouple
is performed in the factory: for this reason,
do not turn the adjusting screw (T).
14. Other hot beverage
13 EN
7a
6a
Scalding hazard! Use the appropriate
insulating devices (A) to move the water and
steam wands.
F
T
A
R