Seko KRONOS 50 Manuel D'installation page 17

9.3 During the Stop
10. QUICK PARAMETER SETTING
From dosing visualization mode, by pressing for at least 3 seconds the
setting menu:
In this menu you can change the following items:
1) Max Flow Rate in:
o mA Mode
Manual Mode
o
Note: the information is shown both, in the current units (i.e. l/h) and also in percentage of the maximum
2) N in:
o 1:N Mode
o N:1 Mode
3) Quantity in:
Batch Mode
o
4) ppm in
ppm Mode
o
To modify the current value keeping pressed the
0000137630
Pump Stautus (Stop)
Stop ˘contrast^
<REV TubChange>
Tubing change
Manual Mode
15.0 l/h
with
Rev. 4.2
Contrast adjustment
key, the display will show the quick
100%
or
keys.
15