Seko KRONOS 50 Manuel D'installation page 10

Paragraph 5
These items menu are different depending on the
settings:
Manual Mode
•
mA Mode
•
• PPM Mode
1:N Mode
•
N:1 Mode
•
Batch Mode
•
Case Manual Mode:
Pump doses at selected flow rate. If OFF Time is set to 0sec, pump runs continuously.
Pump start dosing after a selectable Delay time.
Ex. Manual Dosing with trigger:
Trigger
Dosing
Delay
If no trigger is selected, pump start delay counting after power-on.
Programming
Manual MODE
ON Time sec
Manual MODE
OFF Time sec
Manual MODE
DELAY Time sec
0000137630
PROG
Configuration
ON OFF
The pump operates in constant mode. The flow can only be
manually regulated by pressing the
same time to increase the flow, or the
decrease it.
Makes it possible to set:
Rev. 4.2
Pump function
Manual Mode
Operation
ON Time= Time for which the pump runs.
•
OFF Time= Time for which the pump is stopped.
•
DELAY Time= time delay after which the pump
•
starts to run.
menu
keys at the
keys to
8