Camera Description; Camera Installation; Cable Routing - Abus TVCC74000 Manuel Utilisateur

7. Camera description

4
2
3
(1) Base plate
(2) Lens window
(3) Infrared LEDs
(4) Focus adjustment
(5) Zoom adjustment

8. Camera installation

8.1 Cable routing

ATTENTION!
During the assembly the camera must be separated from the mains voltage.
For cable routing there are 2 options:
a) Covered cable routing
For covered cable routing please drill a hole at the mounting position. Please route the cables
through this hole, the camera will cover the cable and cable lead through.
b) Surface cable routing
For a visible routing of the cable a cable lead through at the side of the base plate is available.
5
1
7
8
(6) Camera housing
(7) Camera cover
(8) Fixing screw for camera cover
25
6