What To Do If - AEG-Electrolux HK634200XB Notice D'utilisation

38

What to do if...

To remove the dirt:
1. – Remove immediately: melted plastic, plastic foil, and food with sugar. If not, the
dirt can cause damage to the appliance. Use a special scraper for the glass . Put
the scraper on the glass surface at an acute angle and move the blade on the surface .
– Remove after the appliance is sufficiently cool: limescale rings , water rings,
fat stains, shiny metallic discolorations. Use a special cleaning agent for glass ce-
ramic or stainless steel.
2. Clean the appliance with a moist cloth and some detergent.
3. At the end rub the appliance dry with a clean cloth.
WHAT TO DO IF...
Problem
You cannot start the appliance
or operate it.
A sound operates when the ap-
pliance is off.
The residual heat indicator
does not come on.
The automatic warm up func-
tion does not start.
A sound operates and appli-
ance starts and stops again. Af-
ter 5 seconds one more sound
operates.
Sensor fields become hot.
The display changes between
two heat settings.
comes on.
Possible cause and remedy
• Start the appliance again and set the heat setting within 10
seconds.
• The key lock or child safety device operates
function. See the section "Locking/unlocking the control pan-
el" and "Child safety device".
• STOP+GO operates
"Stop and go".
• You touched 2 or more sensor fields at the same time. Only
touch one sensor field.
• There is water or fat stains on the control panel. Clean the
control panel
You covered one or more sensor fields. Uncover the sensor fields.
The cooking zone is not hot because it operated only for a
short time. If the cooking zone must be hot, speak to the after
sales service.
• There is still residual heat on the cooking zone
cooking zone cool down
• The highest heat setting is set. The highest heat setting has
the same power as the automatic warm up function.
You covered . Uncover the sensor field.
The cookware is too big or you put it too near the controls. Put
large cookware on the rear cooking zones if necessary.
Power Management decreases the power of this cooking zone.
Use cooking zones on the other side.
• The automatic switch-off operates. Stop the appliance and
start it again.
Overheating protection for the cooking zone operates. Stop
the cooking zone and start it again.
. Stop the function. See the section
. Stop the
. Let the