The Heat Setting; Automatic Heat Up; Switching The Power Function On And Off; Power Management - AEG-Electrolux HK634200XB Notice D'utilisation

34
Operating instructions
Automatic Switch Off times
Heat setting
Stops after

The heat setting

Touch to increase the heat setting. Touch
shows the heat setting. Touch

Automatic Heat Up

You can get a necessary heat setting in a shorter
time if you activate the Automatic Heat Up func-
tion. This function sets the highest heat setting
for some time (see the graphic), and then decrea-
ses to the necessary heat setting.
To start the Automatic Heat Up function for a
cooking zone:
1. Touch
2. Immediately touch
display.
3. Immediately touch
the necessary heat setting comes on. After 3
seconds
To stop the function touch

Switching the Power function on and off

The Power function makes more power available to the induction cooking zones. The Pow-
er function is activated for 10 minutes at most. After that the induction cooking zone
automatically switches back to the highest heat setting. To switch on, touch
comes on. To switch off, touch

Power management

The power management divides the power be-
tween two cooking zones in a pair (see the fig-
ure). The power function increases the power to
the maximum level for one cooking zone in the
pair and automatically decreases in the second
cooking zone to a lower power level. The display
for the reduced zone alternates.

Using the Timer

Use the timer to set how long the cooking zone operates for one cooking session.
-
6 hours
. comes on in the display.
. comes on in the
again and again until
comes on in the display.
.
-
5 hours
to decrease the heat setting. The display
and at the same time to switch off the cooking zone.
or .
4 hours
11
10
9
8
7
6
5
4
3
2
1
0
1 2 3 4 5
-
1.5 hours
6 7 8 9
,