Environment Concerns; Packaging Material - AEG-Electrolux HK634200XB Notice D'utilisation

Problem
comes on.
and a number come on.
come on.
If you tried the above solutions and cannot repair the problem, speak to your dealer or
the Customer Care Department. Give the data from the rating plate, three-digit-letter
code for the glass ceramic (it is in the corner of the cooking surface) and an error mes-
sage that comes on.
If you operated the appliance incorrectly, the servicing by a customer service technician
or dealer will not be free of charge, even during the warranty period. The instructions
about the customer service and conditions of guarantee are in the guarantee booklet.

ENVIRONMENT CONCERNS

The symbol
be treated as household waste. Instead it should be taken to the appropriate collection
point for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed information about recycling of this
product, please contact your local council, your household waste disposal service or the
shop where you purchased the product.

Packaging material

The packaging materials are friendly to the environment and can be recycled. The plastic
components are identified by marking: >PE<,>PS<, etc. Discard the packaging materials
as household waste at the waste disposal facilities in your municipality.
• The cookware is incorrect. Use the correct cookware.
• There is no cookware on the cooking zone. Put cookware on
the cooking zone.
• The diameter of the bottom of the cookware is too small for
the cooking zone. Use the correct cookware (min.120mm)
• The cookware does not cover the cross. Cover the cross fully.
There is an error in the appliance.
Disconnect the appliance from the electrical supply for some
time. Disconnect the fuse from the electrical system of the
house. Connect again. If
sales service.
There is an error in the appliance, because a cookware boils dry
or you use not correct cookware. Overheating protection for
the cooking zone operates. The automatic switch-off operates.
Switch off the appliance. Remove the hot cookware. After ap-
proximately 30 seconds switch on the cooking zone
again.
Cool down the cookware and check it with the section Cook-
ware for the induction cooking zone.
on the product or on its packaging indicates that this product may not
Environment concerns
Possible cause and remedy
comes on again, speak to the after
should disappear, residual heat indicator can stay.
39