What To Do If - AEG-Electrolux 68002 K-MN Notice D'utilisation

14

What to do if ...

.
Type of dirt
sugar, food containing sugar
plastics, tin foil
limescale and water rings
fat splashes
shiny metallic discolouration
*Scrapers and cleaners for glass ceramic and stainless steel can be purchased in specialized shops
3
Remove stubborn residues with a cleaner for glass ceramic or stainless steel.
3
Scratches or dark stains on the glass ceramic that cannot be removed do not however
affect the functioning of the appliance.
What to do if ...
The appliance cannot be
switched on or is not operat-
ing
The cooking zones automati-
cally reduce the cooking level
to
immedi-
ately
yes
yes
---
---
---
Problem
More than 10 seconds have
passed since the appliance was
switched on
The lock is switched on
The child safety device is
switched on
Several sensor fields were
touched at the same time
Automatic switch off has been
triggered
Dirty control panel
The sensor fields are partly
covered by a damp cloth or
with liquid
Remove
when the appliance has
cooled down
---
---
yes
yes
yes
Possible cause
using
a scraper*
cleaner for glass ceram-
ic or stainless steel*
Remedy
Switch the appliance on again.
Switch off the lock (See the
section "Locking/unlocking the
control panel")
Deactivate child safety device
(See the section "Child safety
device")
Only touch one sensor field
Remove any objects (pan,
cloths, etc.) that are lying on
the control panel. Switch the
appliance on again
The sensor fields must be dry
and fat-free.
Remove the cloth or the liquid.
Reset the cooking level re-
quired.