The Heat Setting; Automatic Heat Up; Switching On And Off The Power Function - AEG-Electrolux HK854400FB Notice D'utilisation

22
Operating instructions
Automatic Switch Off times
Heat setting
Stops after

The heat setting

Touch the control bar at the heat setting. Change
to the left or the right, if it is necessary. Do not
release before you have a correct heat setting. The
display shows the heat setting.

Automatic Heat Up

You can get a necessary heat setting in a shorter time if you activate the Automatic Heat
Up function. This function sets the highest heat setting for some time (see the graphic), and
then decreases to the necessary heat setting.
To start the Automatic Heat Up function for a cooking zone:
1. Touch
2. Immediately touche the necessary heat setting. After 3 seconds
play.
To stop the function change the heat setting.

Switching on and off the power function

The power function gives more power to an induction cooking zone for no longer than 10
minutes. After that time, the induction cooking zone automatically sets back to
start it , touch
-
6 hours
12
11
10
9
8
7
6
5
4
3
2
1
0
1 2 3 4 5 6 7 8 9 10 11 12 13 14
( comes on in the display).
and comes on. To stop it, set a heat setting between
-
5 hours 4 hours
- -
1.5 hours
comes on in the dis-
and
P
. To
.