Getting Started; Safety Instructions - Hama 8USLB Mode D'emploi

Getting started

Safety instructions

GB
35
■ Visually inspect the device before using it to make sure that there
is no external damage. Do not operate the device if it is damaged.
■ Keep the device away from moisture and do not allow liquids or
objects to enter the device. Disconnect the power supply adapter
immediately if the device comes into contact with liquids.
■ Place the device on a flat, level surface.
■ Do not place any objects on top of the device.
■ Do not place the device in a hot, wet or very humid environment.
■ The device requires adequate air circulation in order to function
properly. During operation, do not place the device on soft sur-
faces, carpets or other materials that might block air circulation,
and do not make any modifications to the device.
■ Keep the cable away from hot surfaces and sharp edges.
■ Make sure not to bend the cable or pull it too tightly.
■ The electrical socket must be easily accessible so that the power
supply adapter can be easily unplugged in case of emergency.
■ If you are not going to use the device for an extended period of
time, switch off the device, disconnect it from the power supply and
store it in a clean, dry place that is away from direct sunlight.
■ Only use the included power supply adapter; otherwise the device
may be damaged.
■ Do not operate the device if the power supply adapter, connection
cable or plug is damaged.