Publicité
Les langues disponibles
Les langues disponibles
1. General usage remarks (factory assembly)
E
• The original anvils assembled on both measurement axes are lapped in posi-
tion to guarantee an optimum measurement. Any disassembly of these anvils
can lead to a reduction in the accuracy of the instrument.
• The tailstock was positioned to have 0.5mm prestress in the probe zero posi-
tion.
• Using the release lever allows a measurement range of about 3.5mm. Relea-
sing the release lever too sharply can have a harmful influence on the probes
and the measurement accuracy.
• It is advisable to check the reference (origin) during use.
• Monitor the cleanliness of the moving spindle. If necessary clean with light
benzene. Using a cloth that could leave residual particles is not recommended.
• Certain components, notably the headstock clamp screws are sealed after
assembly and consequently must not be removed. Any work on these compo-
nents by a third party can lead to loss of the guarantee.
2. Operating features of the instrument
Whether it is a version with probe or version with dial gauge, the instrument has
a measurement range of about 3.5mm for a measurement scale of 10mm. This
measurement capacity can be extended to 37mm.
The moving tailstock is available in three variants :
- fixed tailstock
- tailstock with fine height adjustment
- tailstock with fine height adjustment and checking comparator
The instrument can be equipped with several standard accessories. Their
descriptions with explanations and use are found in chapter 7.
3. Specifications
Measurement capacity :
Measurement scale :
Measurement range :
Measurement force
Weight :
Probe system :
Working temperature (storage) :
0-37mm
0-10mm
3,5mm
1,0 N
1,4 kg
Ø1,5 and compatible Cary
+5 à +40°C (-10 à +60°C)
4
Publicité
