Maytag MVWB965HW Guide D'utilisation Et D'entretien page 13

10.
Select cycle options
Select any other cycle options you may wish to add, if not
previously set. Some cycles will automatically add certain
options such as Extra Rinse. These may be turned off,
if desired.
NOTE: Not all options are available with all cycles. Touch
control panel to select any other options.
11.
Touch and hold START/PAUSE
button to begin wash cycle
Touch and hold the START/PAUSE button to start the wash
cycle. When the cycle has finished, the end of cycle signal
will sound (if set). Promptly remove items when cycle is
done to avoid odor, reduce wrinkling, and rusting of metal
hooks, zippers, and snaps.
Unlocking the lid to add items
If you need to open the lid to add one or two missed items:
Touch START/PAUSE button to pause washer; the lid
will unlock once the washer movement has stopped.
This may take several minutes if the load was spinning
at a high speed. Then close the lid and touch and hold
the START/PAUSE button again to restart the cycle.
IMPORTANT: If lid is left open for more than 10 minutes,
the water will pump out and the F8E6 error code will appear
on the display.
13