Troubleshooting - Home Skinovations Silk'n Blue UE08WCP-105040SPA Manuel De L'utilisateur

Undo the screw at the bottom panel of the
Applicator.
Lift and remove the top panel of the Applicator.
Push the three snaps and pull out the electronics card.
Cut the tow wires that connect the rechargeable
batteries pack to the Applicator.
Cut the tow wires that connect the electronics card
to the lower panel of the Applicator.

Troubleshooting

This chapter summarizes the most common problems you could
encounter. If you are unable to solve the problem with the informa-
tion below, contact your local Silk'n Customer Service Center for
further support.
Problem
Silk'n Blue does not
work
Silk'n Blue suddenly
switches off
Device temperature
rises during recharge
14
Possible Cause Solution
Charge the Applicator
The rechargeable
batteries are empty
Contact your local Silk'n Customer Service
The Applicator is
broken
Center
The rechargeable Charge the Applicator
batteries are empty
This is normal No action is required