Quick Start - Home Skinovations Silk'n Blue UE08WCP-105040SPA Manuel De L'utilisateur

Quick Start:

When you first open your Silk'n Blue™, charge for the
first time by plugging the Base Unit to electrical current
and placing the Applicator in it for up to 6-8 hours.
Before treatment the skin should be clean, dry and free
of any powder, gel or cream.
Press the Power On/Off Switch. The green Ready/
Treatment Indicator Light (I) will start blinking, and
shortly afterwards will be lit steadily.
Your Blue is ready for treatment.
Place the Treatment Surface on your skin. The LED light
will automatically activate.
Keep holding the Blue Applicator against the skin area
for 3-4 minutes. The Treatment Surface temperature will
slowly increase.
Move the Treatment Surface to the next location and
perform the treatment for 3-4 minutes on each area of
concern.
For best results use twice per day for 6-8 weeks. Repeat
the treatment twice a week for maintenance.
2