Performance Specifications - MSA Omega Five Unit Supply Mode D'emploi

Performance Specifications

Performance of the Omega Five Unit Charger is summarized in
TABLE 2-1. These specifications are subject to the limitations listed in
the accompanying notes. Other specifications are listed in TABLE 2-2.
Table 2-1. Performance Specifications
OUTPUT CURRENT:
OUTPUT PROTECTION:
OPERATING
TEMPERATURE
RANGE:
Table 2-2. General Specifications
MAINS VOLTAGE
AND FREQUENCY:
STORAGE
TEMPERATURE:
CASE MATERIAL:
DIMENSIONS:
WEIGHT:
SUPPLIED
ACCESSORIES:
2-2
Output Voltage
Output Current per Channel
Output current is limited to a safe value in the event an
output plug shorts
Any output terminal may be short-circuited to any other
output terminal without damage to the charger
Output protection requires an Omega- compatible battery
pack connected to the charger.
The charger powers OFF if a non-Omega load is connected
All 5 outputs can be used at the rated value simultaneously
Output protection is provided for each output independently
32 to 104°F (0 to 40°C) Non-condensing atmosphere
Ambient temperature for optimal charging of MSA battery
packs is 20°C +10°C
115/230 VAC, user selectable
47 to 63 Hz
Mains connection made via IEC 320 power connector
Protection provided to blow fuse if charger configured
for 115 Volt mains is connected to 230 Volt mains
32 to 104°F (0 to 40°C)
Electrically insulating Thermoplastic, UL 94V-0 rated
6.1 inches (154 mm) wide x 2.5 inches ( 64 mm) high x
6.3 inches (159 mm) deep
2.9 pounds (1.3 kg)
NEMA 5-15P power cord
3/8 A. SB fuse supplied for 230 V operation
9.0 VDC maximum load
500 mA maximum