Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
•
Move the television as far away from the power inverter as possible.
•
Keep the cables between the battery and the power inverter as short
as possible and twist them together with about 2 to 3 twists per foot.
This minimizes radiated interference from the cables.
Condition
Poor contact
Battery voltage is too low
Shutdown on overload
Thermal shutdown
Receptacle has no power
Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
User's Manual—Read before using this equipment
Solution
Clean contact parts thoroughly
Start the engine to recharge the battery.
Replace the battery if needed.
Reduce the inverter's wattage load
Allow the inverter to cool down by reducing
the load or turning it off for a while.
Check the receptacle wiring.
©2014 Wagan Corporation. All Rights Reserved.
8
Publicité
Table des Matières
