Wagan Tech Smart AC 400W USB+ Guide D'utilisation page 5

SET UP
• Make sure there is at least 2 inches of clearance around the inverter
for air flow. The inverter generates heat while in operation. This is
not a malfunction. However, if the inverter gets too hot, it will turn
off automatically. It is important to position the inverter in a way
that allows air to flow freely around it so the heat may disperse.
The inverter's thermal protection prevents it from operating when its
temperature exceeds 130 ºF ±10 ºF.
• If you operate the inverter in a moving vehicle, you need to secure the
inverter to prevent it from shifting around while the vehicle is moving.
PRODUCT USAGE DIAGRAM
Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
User's Manual—Read before using this equipment
©2014 Wagan Corporation. All Rights Reserved.
4