Radio - Kenwood KMM-122 Mode D'emploi

GETTING STARTED
TUNER SETTING
PRESET TYPE NORMAL: Memorizes one station for each preset button in each band
(FM1/FM2/FM3/AM). ; MIX: Memorizes one station for each preset
button, regardless of the selected band.
SYSTEM
KEY BEEP ON: Activates the keypress tone. ; OFF: Deactivates.
SOURCE SELECT
BUILT-IN AUX ON: Enables AUX in source selection. ; OFF: Disables. ( 9)
F/W UPDATE
UPDATE SYSTEM
F/W UP xxxx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not
activated).
For details on how to update the firmware, visit
<www.kenwood.com/cs/ce/>.
CLOCK
CLOCK DISPLAY ON: The clock time is shown on the display even when the unit is turned
off. ; OFF: Cancels.
ENGLISH Select the display language for [FUNCTION] menu and music information
if applicable.
ESPANOL
By default, [ENGLISH] is selected.

RADIO

Search for a station
1
Press repeatedly to select RADIO.
2
Press repeatedly (or press
control) to select FM1/FM2/FM3/AM.
3 Press S / T (or press S /
search for a station.
• To change the searching method for S / T: Press
repeatedly.
AUTO1 : Automatically search for a station.
AUTO2 : Search for a preset station.
MANUAL : Manually search for a station.
• To store a station: Press and hold one of the number buttons (1 to 6).
• To select a stored station: Press one of the number buttons (1 to 6) (or
press one of the number buttons (1 to 6) on the remote control).
Direct Access Tuning
(using the remote control)
1
Press DIRECT to enter Direct Access Tuning.
2
Press the number buttons to enter a frequency.
3
Press to search for a station.
• To cancel, press or DIRECT.
• If no operation is done for 10 seconds after step
is automatically canceled.
/ on the remote
on the remote control) to
2
, Direct Access Tuning
5
ENGLISH