Controls; Auto Adjust - NEC MultiSync LCD2070NX Manuel De L'utilisateur

Controls

OSM (On-Screen Manager) control buttons on the front of the monitor
®
function as follows:
To access OSM menu, press any of the control buttons (MENU/EXIT, Left, Right,
Down, Up).
To change signal input, press the SELECT button.
NOTE: OSM must be closed in order to change signal input.
Button
MENU/EXIT
Left/Right
Down/Up
SELECT
RESET/DV MODE
RESET
(LCD2070VX)
NOTE: When RESET is pressed in the main and sub-menu, a warning win-
dow will appear allowing you to cancel the RESET function by pressing the
MENU/EXIT button.
Brightness/Contrast Controls
BRIGHTNESS
Adjusts the overall image and background screen brightness.
CONTRAST
Adjusts the image brightness in relation to the background.
AUTO Contrast (Analog input only)
Adjusts the image displayed to optimal settings.
DV MODE (LCD2070NX, LCD2170NX only)
Allows you to select the suitable setting for Movie, Picture , etc.

Auto Adjust

Automatically adjusts the Image Position, H. Size and Fine settings.
(LCD2070NX, LCD270NX)
(Analog input only)
Menu
Exits the OSM controls.
Returns to the OSM main menu.
Moves the highlighted area left/right to
select control menus.
Moves the bar left/right to increase or decrease the
adjustment.
Moves the highlighted area down/up to select one of
the controls.
Active Auto Adjust function. Enter the OSM sub
menu.
Resets the highlighted control menu to the factory
setting.
Enter the DV MODE. (NX models only)
2