NEC MultiSync LCD2070NX Manuel De L'utilisateur page 16

Controls
Menu Tools
LANGUAGE: OSM
OSM LEFT/RIGHT: You can choose where you would like the OSM control
image to appear horizontally on your screen.
OSM DOWN/UP: You can choose where you would like the OSM control image
to appear vertically on your screen.
OSM TURN OFF: The OSM control menu will stay on as long as it is in use. In the
OSM Turn Off submenu, you can select how long the monitor waits after the last
touch of a button to shut off the OSM control menu.
OSM LOCK OUT: This control completely locks out access to all OSM control func-
tions except Brightness and Contrast. When attempting to activate OSM controls
while in the Lock Out mode, a screen will appear indicating the OSM controls are
locked out. To activate the OSM Lock Out function, press SELECT, then right control
button and hold down simultaneously. To deactivate the OSM Lock Out, press
SELECT, then left control button and hold down simultaneously while in the OSM
menu.
RESOLUTION NOTIFIER: If this option is ON, a message will appear on the screen
after 30 seconds notifying the user that the optimal resolution is not being used.
The optimal resolution is 600 x 200.
Information
The Information menu indicates the current input, display resolution, horizontal
and vertical frequency, and polarity settings of the monitor. The model and serial
numbers of your monitor are also indicated.
OSM Warning: OSM Warning menus disappear with Exit button.
®
NO SIGNAL: This function gives a warning when there is no signal present.
After power is tuned on or when there is a change of input signal or video is
inactive, the No Signal window will appear.
RESOLUTION NOTIFIER: This function gives a warning if a resolution other
than the optimal resolution is used. After power is turned on or when there is a
change of input signal or the video signal doesn't have proper resolution, the
Resolution Notifier window will open. This function can be disabled in the Menu
Tools.
OUT OF RANGE: This function gives a recommendation of the optimized
resolution and refresh rate. After the power is turned on or there is a change of input
signal or the video signal doesn't have proper timing, the Out Of Range menu will
appear.
• For Advanced Menu options for the LCD270NX only see page 22.
- continued
control menus are available in eight languages.
®
4