NEC MultiSync LCD2070NX Manuel De L'utilisateur page 9

2. Analog input only: No-Touch Auto Adjust automatically adjusts the
monitor to optimal settings upon initial setup for most timings. For
further adjustments, use the following OSM
• Auto Adjust Contrast • Auto Adjust
Refer to the Controls section of this User 's Manual for a full descrip-
tion of these OSM controls.
NOTE: For download information on the Windows
Me/2000/XP INF file for your monitor, refer to the References sec-
tion of this User's Manual.
NOTE: If you have any problems, please refer to the Troubleshoot-
ing section of this User's Manual.
Raise and Lower Monitor Screen
The monitor may be raised or lowered. To raise or lower screen, place
hands on each side of the monitor and lift or lower to the desired height
(Figure RL.).
NOTE: Handle with care when raising or lowering the monitor screen.
Figure RL.
Tilt and Swivel
Grasp both sides of the monitor
screen with your hands and adjust
the tilt and swivel as desired
(Figure TS.).
NOTE: Handle with care when tilting
and swiveling the monitor screen.
Display Setup
controls:
®
Figure TS.
7
- continued
95/98/
®