Pre-Commissioning; Brief Inspection; Labels; Handling Of The Electro-Hydraulic Punching Device - hawa Powerlec Vario Manuel D'utilisation

Existing residual risks can be avoided through:
• Attentive operation.
• Following the recommendations and instructions as set out in this instruction manual.
• Applying the safety regulations.

4. Pre-commissioning

4.1 Brief inspection

Please check if all the components listed was included in delivery.
Scope of delivery: 1
1
1
2
1
2
2
1

4.2 Labels

The following labels and instructions can be found on the device:
• company name and address,
• summary of punchable hole diameter,
• punching force,
• serial number,
• and hazard reference for the punching process.
Label position descriptions can be found under heading 7. Technical data.

5. Handling of the electro-hydraulic punching device

5.1 Description of components

The Powerlec Vario is a hand-held punching device consisting of the following components:
Ill. 1
Item Nr. Designation
1 Punching head
2 Reset slide
3 LED (red)
4 Battery release latch
5 Battery (BL 1830)
6 LED (white)
7 Operation switch
8 AC adapter
14
Battery-operated electro-hydraulic punching device type; Powerlec Vario
Battery
Charger
Actuation screws
Bush adapter
Bushes
Operating instructions (1 for the device and 1 for the charger)
Punch set (for Powerlec Vario with round punch)
1
Function
Head for hosting a tension bolt including punch and die.
Slider to abort the punching process in case of malfunction.
Displays battery capacity, maintenance and error.
Release latch for the battery.
Rechargeable Li-Ion battery.
To illuminate the working environment.
Triggers the punching process.
For connection to the 230V AC mains.
2
7
6
8 5
BL1830
3
4