hawa Powerlec Vario Manuel D'utilisation page 12

Operating instruction Powerlec Vario
Contents
1. Introduction
2. Safety regulations
2.1 General safety requirements
2.2 Operating safety instructions when handling the Accu Flexi-power
3. Intended use
3.1 Utilization
3.2 Misuse through improper handling
3.3 Hazards
4. Pre-commissioning
4.1 Brief inspection
4.2 Labels
5. Handling of the Electro-hydraulic punching device
5.1 Description of components
5.2 Description of the essential features of the device
5.3 Operating functions
5.4 Description of the automatic control (microprocessor)
5.5 Description of the LED display
6. Working with the electro-hydraulic punching device
6.1 Description of the punching process
6.2 Individual operating steps
6.3 LED for workspace illumination
6.4 Application scope (including material thickness table)
6.5 Battery and charging unit instructions
6.6 Malfunction of the punching device
7. Technical data
8. Accessories
9. Other
9.1 Maintenance
9.2 Storage and transport
9.3 Decommissioning / disposal
1. Introduction
Thank you for choosing the Powerlec Vario.
These operating instructions are the detailed instructions for the operating and the safe use of the device.
Please keep this manual in a safe place, and ensure that it is read, understood and that the instructions are followed by the operators
of the device. The instructions should always accompany the device through its entire operating lifetime. If you have any questions
about the device, or its functioning after reading the instructions, please contact your local distributor or the manufacturer directly.
2. Safety regulations
2.1 General safety instructions
Tools with moving parts always carry a risk of injury and require a great deal of respect and diligence.
To avoid risks, please read the instructions carefully before taking the device into operation.
• The tool may only be operated in proper functioning condition.
• Variations of any kind must be reported immediately to a supervisor.
• The device should be utilized in a tidy workspace.
• The working area should be well illuminated.
• The operator is obligated to wear appropriate protective clothing (goggles).
• Refrain from operating the tool under reduced concentration. (E.g. through the influence of drugs or alcohol intake.)
• Keep children away.
The device is not suitable to be operated by any other person/s as described in the instructions.
häwa GmbH will not be held liable for any damages whatsoever resulting from abuse of any kind.
12