17
model no. 060-0581-2
WARNING! Disconnect the extension cord before performing any maintenance task.
If the extension cord is plugged into the snow shovel, someone could accidentally turn on the unit
while you are performing maintenance on it, which could result in serious personal injury.
Replacing the Paddle
WARNING! Disconnect the power supply to the electric snow shovel before beginning work.
1.
Use a wrench to remove the bolt and the
washer on the right side of the housing
(Fig. 9).
2. Using a cross-head screwdriver,
disassemble the left side cover by
removing the seven (7) screws (Fig. 10).
3.
Remove the tensioner. Unscrew the three
(3) screws securing the big pulley plate,
then remove the plate and pulley assembly
(Fig. 11).
I contact us: 1-844-428-7277
Wrench
Big pulley plate
Fig.9
Bolt
Fig.10
Fig.11
Tensioner