CERTIFIED 060-0581-2 Guide D'utilisation page 16

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

To remove snow most efficiently, throw the snow downwind and slightly overlap each swath.
If you need to clear snow from a crushed rock or gravel surface, push down on the handle to
clear the scraper of any loose material that the rotating paddles could throw.
This electric snow shovel cuts a path 12 in. (30.5 cm) wide and up to 6 in. (15.24 cm) deep in one
pass.
When clearing deeper drifts, hold the electric snow shovel by the upper and lower handles and
use a swinging or sweeping motion. Remove up to 6 in. (15.24 cm) of snow with each pass and
repeat as many times as needed.
Keep the cord clear of obstructions, sharp objects and the rotating paddles. Do not pull sharply
on the cord or abuse it in any manner. Frequently inspect the cord for signs of damage. If
damage is found, replace the cord immediately.
This electric snow shovel is equipped with
a 1 W LED light to faciliate clearing at night
and under conditions of poor visibility
(Fig. 8). When you start the machine, the
LED light will automatically power on and
illuminate the path in front of you. When
you stop the machine, the LED light will
automatically power off.
Disconnect the extension cord after using the electric snow shovel. Hang the extension cord
with the shovel so it will not be misplaced or damaged.
16
LED light
Fig.8

Publicité

Chapitres

Table des Matières
loading

Table des Matières