Electrolux thermaline S90 Instructions D'installation Et D'emploi page 11

2.1 FRONT PANELS (A) and (B)
(1)
Fig.6 Front panel
Unscrew screws (1 or 3). Also, in the case of a built-in oven,
unscrew screws (2 and/or 4) on the inside of the oven.
Pull the panel away forwards and downwards.
2.2 CONTROL PANEL (C)
(3c)
(1)
1
a
Fig. 7 Control panel
Remove the knob.
Loosen the screws underneath (1 / Fig.7a) and remove the
base plate.
Loosen the screws (2 / Fig.7b) and 3 / Fig.7c)
Remove the panel.
2.3 OVEN, STORAGE SPACE, HOT CABINET
Remove panels A, B and C.
Undo screws (5).
Pull out element.
62.9534.01_UL
INSTALLATION INSTRUCTIONS
(2)
(3c)
1
b
(3)
c
3. DOWNPIPE
(3c)
(1)
1
a
Fig. 8 Downpipe
Work surfaces with a downpipe (Fig.8a) have the downpipe
opening on the right-hand side of the appliance. A flexible sili-
con hose when installed in the standard manner ends under-
neath and to the right, 0.8" (20 mm) behind the front of the
appliance (Fig.8b).
Alternatively, the hose can be relocated to the rear and be
routed through other pre-cut openings (Fig.8c).
b
(3)
c
Page 7