Carburetor Adjustment; Spark Plug; Technical Data - Gardeo GSTD26ROOF Traduction Des Instructions Originales

6.3 CARBURETOR ADJUSTMENT

The carburetor was pre-set at the factory for optimum performance. If further adjustments are necessary take your
blower to a qualified service dealer.

6.4 SPARK PLUG

1. To remove spark plug(B)(Fig.22)for cleaning or
replacement: make sure engine is off, spark plug
is cool, then grasp spark plug boot firmly and
remove from spark plug. Remove spark plug with
correct spark plug tool. Inspect, clean or
replace as needed.
2. Spark plug gap =.025 in.(.635mm)(Fig.22).
3. Torque to 105 to 130 inch pounds (12 to 15 Nm).
Connect spark plug boot.

7. TECHNICAL DATA

Model
Air velocity
Air volume
Engine displacement
Fuel tank capacity
Fuel type
Fuel mixture
rated engine power
Idling speed
Max engine speed
Sound pressure level :
Sound power level:
Sound power level according to 2000/14/EC:
Vibration:
Dry weight
year of construction
GSTD26ROOF
280km/h
3
8m /min
3
26 cm
500 ml
unleaded
30:1
-1
0.7kW /7500 min
-1
3500 min
-1
9000 min
- Idling: 82,1 dB(A)
- Racing: 93,8 dB(A)
- Average: 93,18 dB(A)
- Uncertainly K=3 dB(A)
- Idling: 92,31 dB(A)
- Racing: 105,34 dB(A)
- Average: 105,34 dB(A)
- Uncertainly K=3 dB(A)
- Measured: 106,4 dB(A)
- Guaranteed:107 dB(A)
2
- Idling: 2,241 m̷ ̷ / s
2
- Racing: 1,100 m̷ ̷ / s
2
- Average: 1,325 m̷ ̷ / s
- Uncertainly K=1,5 m̷ ̷ / s
5.7 Kg
BJ2016
Fig.22
2