Motion Detection - Eneo VKCD-1322 Instructions D'installation Et D'utilisation

• SYNC
Two SYNCHRONIZATION modes are available, INTERNAL and EXTERNAL LINE-LOCK. In LINE LOCK mode, it
synchronizes the video signal between cameras without a synchronous generator. The line-lock synchronization is
only used in the areas of 60Hz (NTSC models) / 50Hz (PAL models).
INT: Internal synchronization
LL: Exterminal line-lock synchronization
- If you choose „LL", you can adjust the desired phase. Press the SET button.
- You can adjust the desired phase from 0 to 359.
NOTE
When the power frequency is 50Hz, you can not use the line-lock model (NTSC models).
When the power frequency is 60Hz, you can not use the line-lock model (PAL models).
„SYNC" model is fixed „INT" in 12VDC input power.

• MOTION DETECTION

This product has a feature that allows you to observe movements of objects in 4 different areas on the screen, and
the words „MOTION DETECTED" appear on the screen when movement is detected; hence a single individual can
conduct supervision efficiently. The camera detects a object's movement by sensing disparity of outline, and level
of brightness and colour.
Please press the SETUP button.
OFF: MOTION DETECTION mode is cancelled,
ON: Any motion in the selectes areas is observed.
Please select the area you wish to observe from the 4 areas in AREA SEL mode.
Please select ON mode for the chosen area.
Please adjust the size of the area to be observed by using the UP, DOWN, LEFT or RIGHT button.
Please adjust the level of observation by using SENSITIVE mode.
Please press the SETUP button to save the changes and complete the setting.
• PRIVACY
This mode conceals the areas you do not wish to appear on the screen.
OFF: Cancels the PRIVACY mode.
ON: Operates the PRIVACY mode.
Please press the SETUP button.
Please select the area you do not wish to appear from the 4 areas in AREA SEL mode.
Please select ON mode for the chosen area.
Please adjust the size of the area to be conceales by using the UP, DOWN, LEFT or RIGHT button.
• MIRROR
ON: Sets a horizontal image version.
OFF: Cancels the inversion.
6