Troubleshooting - Bartscher 191004 Mode D'emploi

o After descaling, remove the descaling solution. Rinse the water container several
time with clean water and let part of the water go through the tap.
o Descale the teapot with the solution of water and vinegar or with commonly used
descaling product once the scale deposit has formed in the teapot as well.
Storing of the appliance
o Prior to any long intervals in using the appliance, clean it following the above
instructions and store it in dry, clean place protected against frost or sun, and not
available to children. Do not place any heavy object on the appliance.

8. Troubleshooting

CAUTION!
In case of any problems while operating, unplug the appliance immediately.
Consult the following table in case of any problems, before you call service or
contact the seller.
PROBLEM
The appliance does
not work.
The appliance is
turned on but the
heating control light
is not on.
The appliance does
not turn off
automatically.
In the case you cannot solve the problems:
Set the boiling switch at "O". Disconnect the appliance from the power supply
-
(unplug!).
Do not open the body,
-
Call the service or contact the seller.
-
CAUSE
• The plug has not been
placed in the socket.
• Power supply security
system has been initiated.
• Heating control light
damaged.
• Heating element
damaged.
• Over-heating protection
has been initiated: no
water or too little water left
in the water container.
SOLUTION
• Plug in to the socket.
• Disconnect the
appliance from the
power supply. Turn on
the fuse and re-connect
the appliance.
• Contact the seller.
• Contact the seller.
• Allow enough time for
the appliance to cool
down and fill it in with
fresh drinking water.
- 39 -